Hello, welcome to the official website of Shanghai  Sea Industry Co., Ltd.!

National Service Hotline: 

0086-13862262238

Gas generator set

News

Contact Us

Add : Chinese (Shanghai) free trade zone Debao Road No. 38 Building 1 layer 3

Contacts:Mr. Gu

Tel : 0086-13328036867 

        0086-13862262238

        0086-13739165670

Mail : gao888@bestsea.cn 

         gu888@bestsea.cn 

         dong888@bestsea.cn

Web:www.bestsea.cn

Inspection method for serious wear of cylinder sleeve of gas generating set

Your current location: Home >> News >> Common problem

Inspection method for serious wear of cylinder sleeve of gas generating set

Release date:2018-01-16 Author:www.bestsea.cn Click:

According to the use time and working environment of Diesel generator set, it is judged.

According to the analysis of the fault phenomenon of gas generating set (such as power and pressure reduction, etc.), the fault analysis method is adopted.

After the cylinder cover is dismantled, the observation method is adopted.

Diesel generator set

The diameter of cylinder diameter dialgauge measuring diesel engine parts, the method is to take 4 different positions, and then to the 4 position of the diameter measurement. The measured values are compared with the technical parameters of the diesel engine, and the serious wear and tear is determined at the end.

Inspection method of crack and cavitation erosion in cylinder sleeve of gas generating set

Fault analysis method

The diesel engine parts are observed by the observation method. After the cylinder cover is dismantled, the inner wall of the cylinder sleeve is irradiated with a flashlight or the inner wall is touched with the hand to check. Remove the cylinder cylinder with chest, then cleaned out the scale attached to the cylinder sleeve on the outer wall of the outer wall of the cylinder to check with the observation.


Related tags:Dieselgeneratorset

Recent browse: